New product
Warning: Last items in stock!
Availability date:
200 Item Items
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Yield | 6/8 MQ/LT |
NanoFix is a fixative, which is a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
The nanoparticles connect chemically with the surface and interconnect with each other, improving thus the mechanical properties of the surfaces of worn or deteriorated, and to increase the resistance of the substrate.
The nanoparticles also do not seal the pores but support the walls or the cracks in the substrate are worn, keeping the original look.
Also the water vapor permeability and the porosity of the surfaces treated with this fixative consolidane remain unchanged.
Application
Before applying the product, the powder and the parts that are not cohesive to the surface to be treated must be removed.
The surface must be dry and clean before application.
The fixative, a consolidating agent is an aqueous suspension and is applied undiluted with a brush, roller or spray gun airless.
In the case of very absorbing surfaces or damaged it is recommended that you reapply a second coat after 15 minutes.
The drying time of the product is 30 minutes, depending on the level of relative humidity and temperature.
The theoretical output of this primer hardener: 6-8 m2/L depends strongly on the absorption properties of the surface to be treated.
Technical Data
The product is not considered an oxidizer
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.