SILMIX
New product
Warning: Last items in stock!
Availability date:
100 Item Items
Protective consolidating anti-infiltration silicate in an aqueous emulsion.
SilMix is a protective surface hardener and anti-infiltration silicate in an aqueous emulsion.
The product is particularly indicated for the consolidation of surfaces and to realize the treatment, protective anti-dust and anti-wear in the floors.
SilMix is able to render the treated surface more resistant to abrasion, increasing resistance up to 10 times.
The protective surface hardener and anti infiltration also increases up to 4 times the mechanical strength.
Thanks to its special composition allows to achieve an effective action of combining, and make it extremely homogeneous absorption of the support.
Features
Application
The product is used as an additive in the mixture by adding 200 ml of SilMix to the mixing water for 25 kg of dry mix, in order to obtain a surface that can be walked on 12 hours and veicolabile to 48 hours.
Climatic conditions can change the timing of the provision of the consolidating anti-infiltration.
SilMix can be also applied to the surface using a brush or spray at low pressure, taking care to avoid the formation of stagnant or pellicolazioni surface.
The support goes to saturate evenly with one or two hands of the product, depending on the degree of absorption of the treated support.
Before you apply the firming anti-infiltration surface must be clean and dry.
The ideal temperature for product application is between 5°C and 30°C.
It is recommended that you do not use SilMix in conditions of strong heat or frost, and protect from the rain on the treated surface for at least 8 – 12 hours.
It is good to protect with a sheet of polyethylene or other material the party to whom the product is not intended.
The amount of consolidating anti-infiltration to be used varies from 100 to 250 ml for 25 kg of dry mix (water in the mixture is excluded from the count) on the basis of the porosity of the mixture.
Technical Data
Yet
SilMix is a product intended for professional use in the aqueous dispersion.
Has no symbols harmfulness, however, the operator, during the application of the consolidating anti-infiltration must wear the safety equipment required by the rules in force.
We do not accept any responsibility for damage that may result from improper use of the product.
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.