UNIFORMANT R PLUS
New product
Warning: Last items in stock!
Availability date:
100 Item Items
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
Yield | 6/8 MQ/LT |
Uniformant R+ is a bottom surface pigmentabile filler , heat-reflecting effect plaster, suitable for the preparation of the funds internal and external to the subsequent application of the finish of the line Slr cameras and, in particular, the Coating Thickness Termocover.
Strengthens the surface, and it regulates the absorption, already providing a hand covering with properties heat.
In conjunction with Termocover, improves the performance of the thermal resistance of the cycle, further reducing the energy losses.
The colouring is carried out with the use of pigments, IR Reflective, guaranteeing excellent performance also in the case of strong colors.
Application
Prior to application, UniforMant R Plus should be mixed.
The product must be diluted with up to 10 - 20% in volume of water for application by brush on a smooth finish.
For application by roller to the bottom surface, heat-reflecting should be diluted with maximum 10% by volume of water, thus obtaining a light textured finish.
With the solutions above, you get a bucciatura more rounded and with relief less.
The bottom surface heat-reflective may be applied by brush, spray or roller on the dry surface, allowing at least 6 - 8 hours from the previous treatment performed on the substrate.
If there is surface condensation or efflorescence it is good to consolidate the masonry, before going on UniforMant R Plus.
After applying the product, we recommend that you wait 6 - 8 hours before proceeding with subsequent finishing or with a second coat of primer for lime cycles, heat-reflecting.
To obtain a textured finish you must apply the product evenly with the brush or the roller and finish with a short nap roller.
The ideal conditions for the use of UniforMant R Plus include a temperature of between +5°C and +35°C and with a relative humidity of less than 75%.
Technical Data
UniforMant R Plus is a product made of copolymers acrilsilossani, quartz flour in water dispersion and special micro-and nano-particles heat reflective.
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.