UNIFORMANT R
New product
Warning: Last items in stock!
Availability date:
100 Item Items
The fund for painting the rough “effect plaster” with property anchors
Yield | 6/8 MQ/LT |
UniforMant R is a fund for painting rough effect “plaster” with the property anchors, containing special micro and nano particles, the heat that decreases the dispersion of the heat, thus contributing to saving energy.
The product is over-paintable, and is a substrate anchor that is ideal for any traditional finish water-based.
Used in conjunction with painting heat-reflective for indoor or outdoor, this product helps to prevent the formation of condensation and consequent mould development.
The fund for painting UniforMant R allows the transpiration of the wall.
Application
Before use, the bottom paint should be mixed in.
For brush applications on smooth finish UniforMant R should be diluted with a maximum of 10 and 20% by volume of water.
For application by roller, it should be diluted with maximum 10% by volume of water, thus obtaining a finish that's slightly textured.
If the product is diluted further, the bucciatura will be more rounded and the relief less pronounced.
Before applying a second coat or applying the finish, you must wait 6 – 8 hours from the application of the fund for the painting.
If you want to get a textured finish, the product should be spread evenly with the brush or the roller and you must finish with short nap roller.
The ideal conditions for the application of the fund of painting UniforMant R are between +5°C and +35°C with relative humidity less than 75%.
Technical Data
UniforMant R is a fund for paint adhesion, even with the effect of a plaster-based copolymers acrilsilossani, quartz flour in water dispersion and special micro-and nano-particles heat reflective.
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.