UNIFORMANT L PLUS
New product
Warning: Last items in stock!
Availability date:
100 Item Items
The bottom of the uniform heat that can contribute to energy savings in buildings.
Yield | 6/8 MQ/LT |
Uniformant L+ is a bottom surface pigmentabile smooth , heat-reflecting, suitable for the preparation of the funds internal and external to the subsequent application of the finish of the line Slr.
Strengthens the surface, and it regulates the absorption, already providing a hand covering with properties heat.
The colouring is carried out with the use of pigments, IR Reflective, guaranteeing excellent performance also in the case of strong colors.
Application
The product is applied by brush, roller or spray.
Before use it is mixed and diluted.
For applications with a brush on the smooth finish, the dilution of the maximum bottom surfaces, heat-reflecting is with the 10, 20% by volume of water.
While for the applications to roll the dilution of maximum 10% by volume of water.
If the product is diluted further you will have a bucciatura with a significant less pronounced and more rounded.
The bottom surface heat-reflecting should be spread on the dry surface.
If you want to get a textured finish the product should be applied evenly using the brush or the roller and must be carried out for subsequent finish with a short nap roller.
The ideal temperature for drying UniforMant L Plus is between +5° and +35°C with a relative humidity below 75%.
It is necessary to wait from 6 to 8 hours after the application of the first coat of primer for lime cycles, heat-reflecting before we can proceed with a second hand or with successive coats of varnish, so as to give the surface time to dry completely.
Technical Data
Content VOC (DIR. 2004/42/EC) Paints matt for interior walls and ceilings. Limit values EU for subcategory a, type BA, 30 g/l (2010). The bottom surface contains at most 30 g/l of VOCS
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.