TERMOELASTA

Termoelasta is a special membrane of elastomeric heat-reflecting based on special charges, micro-and nano-sized useful to protect the horizontal shell of the buildings from overheating in summer.

With a high capacity to reflect solar heat radiation (>94%), Termoelasta reduces significantly the temperatures of both the surface is therefore internal to the buildings, improving the comfort, environmental , and limiting the use of cooling systems.

Termoelasta has an elasticity higher than 350%, at both high and low temperatures, is waterproof and resistant to standing water and snow.

Termoelasta is walkable. Not suitable on roofs pedestrian or vehicular traffic.

Features

• Reduction in summer-time overheating of the shell and of the internal environment: less use of cooling systems
• Reducing urban heat islands
• Reduction in effect “hot-head”
• Protection of waterproofing systems

Application

The product applies with a brush of good quality, with a roller or with airless spray without dilution, directly on the external surfaces both horizontal and inclined.
Go he stretched out two hands of a sheath liquid, elastomeric, taking care to cover adequately also the corners and edges.
The theoretical output of TermoElasta is 2 ± 1 m2/L and is strongly influenced by the properties of the support.
The ideal temperature for laying the sheath liquid elastomer is between 5 and 35°C.
Before use the product should be shaken for good.
Depending on the thickness of the coating, the membrane and heat-reflecting nanotechnology dries, on average, in 4 hours, even if low temperatures and high humidity can prolong the drying time.
Before applying the subsequent layers of guina liquid elastomeric is still need to wait 24-36 hours from the previous application.
The properties of the coating can be affected by the occurrence of adverse weather conditions during or immediately after application.

Technical Data

• Appearance: creamy
• color: white
• pH = 8.5 ± 0.5
• Viscosity: 160 KU
• Density: 1.00 ± 0.05 kg/L
• Thermal conductivity: < 0.12 W / (mK), (EN ISO 12667:2004). The corresponding value for a conventional paint is 0.50 W / (mK).
• Reflection thermal: 94.89% reflection in the IR region of light (700nm - 2.2 μm ASTM G173)
  The liquid permeability: the sheath liquid elastomeric TermoElasta is "non-permeable" to water according to EN ISO 1062-3:2008
• Resistance to fungi: excellent resistance against fungi and algae, class 1 according to BS3900-G6: 1989
• Elasticity:-10°C: 317%, 23°C: 382%, 60°C: 403%.

Low VOC (Volatile Organic Compounds). Maximum EU of the value of VOC content: 40 g / l maximum content of VOC of this product is 30 g / L.
The sheath liquid elastomeric TermoElasta is not considered to be an oxidizing agent or a corrosive.