SUPERSIL
New product
Warning: Last items in stock!
Availability date:
100 Item Items
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.
SuperSil is a surface hardener for plaster posted particularly indicated for the consolidating treatment of surfaces mineral peeling is not cohesive and absorbent.
It is able to penetrate to the bottom and exert an effective action for aggregation, both on the surface and in depth, thanks to its composition based on silicates of potassium micronized microemulsion aqueous.
The special formulation of nanotechnology and the diameter of very small particles (with an average diameter of 1 nm) allow a high penetration of the product, and confer a high wetting power.
Features
Application
The product is ready to use and is available in micro-emulsion, aqueous.
It is applied with brush, roller or by spraying at low pressure.
In the case of very absorbent surfaces, it is possible to dilute the hardener for plaster up to a maximum of 1 part of SuperSil and 2 parts water.
The theoretical output of the product is 5 – 10 m2/L and depends on the characteristics of the surface to be treated.
It is recommended to make two or more passes, “wet on wet” with surface hardener for plaster, till the saturation, avoiding the formation of excess surface.
The drying time varies from 1 to 6 hours, depending on weather conditions.
The proper temperature for application is between 5 °and 35 ° C.
It is recommended that you do not use the hardener for plaster detached in conditions of rain and full sun.
Before evaluating the effectiveness of the treatment with SuperSil you have to wait 6 to 12 hours.
Technical Data
Yet
The product is intended for professional use.
During the treatment with the surface hardener for plaster seconded the operators must wear the equipment required by current safety standards and enclosed spaces must be adequately ventilated.
When you apply SuperSil you must not smoke and use free flames.
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.