TERMOGLASS
New product
Warning: Last items in stock!
Availability date:
100 Item Items
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
TermoGlass is a special emulsion opalescent semicoprente liquid with properties of heat suitable for skylights and dormers.
The application of this film allows you to keep within the thermal energy, preventing the leakage of heat and increasing the energy savings of the buildings.
The external heat reflective film helps to maintain a cool climate, reflecting UV and infrared in the summer and reducing the tensions dimensional structures.
The film is biocompatible, developed in the most total respect for the man and for the environment.
Features
The application of the film gives the surface properties of reflectance thermal that will block the heat transfer.
The heat reflective film is a cost effective solution for energy savings, also:
Application
The product is easy to apply.
Is used without dilution with a roller, brush, or spray using a nozzle diameter 1,4 mm or more.
Before applying the heat-reflecting film to the surface to be treated should be cleaned and dried.
The product should be agitated before use, and then you proceed to go 2-3 layers, making sure that the edges and corners are properly covered.
The ideal temperature for applying the heat-reflecting film is between 8° and 35 ° C.
The product should not be applied on the parts of the surface that you want to keep it completely transparent.
It is necessary to leave to spend 4 – 6 hours after the first application, before performing the subsequent coats.
The theoretical output of this heat-reflecting film is 6-8 m2/L and is strongly dependent on the properties of the surface to be treated.
Technical Data
The heat-reflecting film TermoGlass is not considered to be an oxidizing agent or a corrosive.
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.