New product
Warning: Last items in stock!
Availability date:
199 Item Items
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
Adelastic is an additive with nanotechnology for concrete and other mixtures can increase theadhesion, theelasticity, the workability prolugando in fact the processing time.
The product also increases water resistance and reduces the cracks, shrinkage and the formation of capillaries that absorb water.
The cement mix is added with Adelastic is more corrosion-resistant surface, the pressure of the water, the threat of ice and extreme weather conditions.
The addition of the additive using nanotechnology will reduce or eliminate the mixture the use of other binding agents in addition to the cement.
Adelastic is a water based product, free from latex and biocompatible, developed in the most total respect for the man and for the environment.
Features
Application
The product can be mixed and added directly into the cement mix at a ratio of 5-10% compared to the weight of the cement used (for example, from 2.5 to 5 kg of the additive with nanotechnology Adelastic for every 50 kg of cement).
The additive for cement may be applied to the surface with a brush or a roller.
The effect is an increase of adhesion when laying a cement mix on an existing surface to perform restores.
In this case, the product can be diluted with water up to a ratio of 1:5 (1 part of Adelastic to 4 parts water).
Paste the product is to be used for restoration from the rising humidity.
The theoretical output of the additive with nanotechnology is 8-10 m2/L.
Before the application of the product, the surface must be clean and dry.
Adelastic is sold by EdilParatiAcilia in packs of 1 and 5 litres.
Technical Data
All tests and measurements were made on mixtures of Portland cement aged for 28 days.
Adelastic is not considered to be an oxidizing agent or a corrosive.
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.