New product
Warning: Last items in stock!
Availability date:
200 Item Items
Fixative thermal nanotechnology is highly breathable.
Yield | 10/12 mq/L Diluito 1:3 |
NanoPrimer is a fixative thermal nanotechnology is highly breathable and is specially formulated to prepare the surface before applying the paint or any other finishing material regardless of the compound, facilitating theapplication and allowing a recovery level of 2, 3 degrees on the wall treated.
The fixative heat NanoPrimer the product is a biocompatible, eco-friendly, low in volatile organic compounds (VOC).
It is water-based and free from resin.
Features
The primer is composed of very small nanoparticles of a size of 60 nm, capable of penetrating deep into the substrate, making it so compact and uniform absorption of the paint on the surface.
This fixative heat is also ideal for wet surfaces where there are problems of mold, thanks to its anti-condensation and thermal insulation.
The application of the product ensures maximum durability and resistance to water, abrasion, weathering, mold, fungi and algae.
The product is used on the funds of porous masonry to facilitate the application and absorption of the paint, the plaster, the arenino or any other finishing material.
The fixative heat can be used on surfaces of buildings external or internal such as concrete, masonry, plaster, cement plaster, eco plaster, screeds and mortars.
This primer can be used on wet surfaces and cold to combat condensation, prevent the formation of mould and to obtain a thermal recovery to some degree.
To increase the power of reflecting is used in combination with painting heat-reflective.
And' possible to apply the fixative heat, even on surfaces that are already painted, to increase the tear resistance or to improve the compactness of the slabs before rolling the pavement.
Application
Prior to application the surface must be clean and dry.
The fixative heat is to be used, dilute solution: for porous substrates of masonry, the dilution is 3 parts water for each part of the product, to the surfaces already painted, the dilution is 4 parts water for each part of the product.
The primer must be well shaken before use.
The gripping material can be applied with a brush, good quality roller or spray with a nozzle of 1.4 mm in diameter or more.
Must be made of a uniform layer of fixative heat on the treated surface.
The theoretical output of this product is 10-12 m2/L depends very much from the properties of the surface to be treated.
The ideal temperature to apply the primer should be between 8 and 35 ⁰C.
NanoPrimer is sold by EdilParatiAcilia in packs of 1 and 5 litres.
Technical Data
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.