UNIFORMANT L
New product
Warning: Last items in stock!
Availability date:
100 Item Items
Primer for lime cycles pigmentabile smooth, suitable to the preparation of internal funds and external to the subsequent application of finishes
Yield | 6/8 MQ/LT |
Uniformant L is a bottom surface pigmentabile smooth, suitable for the preparation of the funds internal and external to the subsequent application of finishes.
Strengthens the surface, and it regulates the absorption, already providing a hand cover.
The colouring is carried out with the use of pigments, IR Reflective, protecting the layer from overheating, even in the case of strong colors.
Application
Before use the product should be stirred and diluted.
If the bottom surface is applied with a brush on a smooth finish, the dilution is a maximum with the 10% or 20% by volume of water.
If it is applied with a roller, a dilution of maximum 10% by volume of water.
Higher dilutions lead to a bucciatura more rounded with a relief less.
6-8 hours after the application of the first coat of primer for lime cycles, it is possible to proceed with a second coat or subsequent coats of finish.
If you want to get a textured finish UniforMant L should be spread evenly with a brush or roller and is to be performed then a finish with a short nap roller.
The ideal temperature to apply the primer for lime cycles is between +5°C and +35°C with a relative humidity of less than 75%.
Technical Data
UniforMant L is the bottom in preparation for anchoring and levelling to smooth effect based on copolymers acrylonitrile-siloxanes and fillers, opaque aqueous dispersion.
Content VOC (DIR. 2004/42/EC) Paints matt for interior walls and ceilings. Limit values EU for subcategory a, type BA, 30 g/l (2010). The bottom surface contains at most 30 g/l of VOCS
There are no reviews
ReflexIn, painting, heat-reflecting interior anti-mould, anti-condensation and breathable that by decreasing the dispersion of heat, it contributes to saving energy.
Additive with nanotechnology for concrete and other mixtures can increase the adhesion, elasticity and workability.
The bottom of the uniform heat-reflecting properties anchors for both internal and external.
The bottom of the uniform heat that can contribute to energy savings in buildings.
Special plaster finish or coating to a thickness of finish that improves the thermal performance of the buildings.
Sheath liquid elastomeric acrylic high quality with properties that reflect heat to the external surfaces.
Heat-reflecting film to the base of the beads and ceramics, and the particles nanoriflettenti dispersed in water.
Exterior paint, heat-reflecting based on siloxanic resins and special fillers, micro-and nano-sized useful to reduce the overheating of the walls in the summer phase, and to limit the heat loss in the winter phase
Smoothing level very low conductivity nanotechnology can improve the thermal performance of buildings.
Fixative a hardener composed of nanoparticles able to penetrate the material up to 20 mm.
Surface hardener for plaster posted particularly suitable for the consolidating treatment of mineral surfaces, peeling is not cohesive and absorbent.