CEBOFIX EXTRA

The Primer coating adheres to the water, Cebofix Extra based on special synthetic resins modified, for internal. It is usable on substrates in metal, plastic, ceramic or wood , suitably prepared, to enable the subsequent application of finishes Cebos.

Preparation of the support:

Metal untreated: scouring, brushing, and thoroughly clean the surface, on ferrous materials first apply products anti-rust.
Painted metal: degrease and clean the surface thoroughly, sand smooth and dust well.
Plastics: degrease and clean the surface thoroughly, sand smooth and dust well.
Untreated wood: prepare the surface with anti tannin to prevent the yellowing.
Wood pre-treated: degrease and clean the surface thoroughly, sand smooth and dust well.
Ceramic tiles: degrease and clean the surface thoroughly.

For media not included in this list it is recommended to do a test
prior to proceeding with the construction of the entire surface.

Application:

Cebofix Extra apply with a roller or brush, diluted 5-10% with water in one or two hands, depending on the degree of absorption of the support.
Wait for the complete drying of Cebofix Extra (minimum 24 hours) prior to application of the finish Cebos chosen.