CEBORUSTIK

CeboRustik coating is a decorative in thickness, with a base of lime putty, with qualities of high breathability and resistance to mold and bacteria. Applicable to low, medium and high thickness, without the problems of cracks, has an excellent power filler. CeboRustik can be used on all types of fund, properly prepared, and it lends itself to creating a variety of effects: in the interior combined with the natural wax colorable CeboFlos, allows you to obtain decorative effects, rustic, in imitation of the plaster of a time. For use in external CeboRustik provides for the subsequent application of the acrylic protective colorable CeboTech.

Preparation of the supports:

Are suitable for all the funds to plaster, to whitewash, to civilian, or with the previous painting. After careful cleaning of the substrates apply by roller one coat of CeboFix R diluted to 20-30% with water.

Application:

CeboRustik apply with trowel stainless steel: spread the product evenly over the surface; thus, the desired aesthetic effect with the trowel or with another tool (spatula, trowel, brush, or the brush of hard fiber). You can also review the surface when the product is wilting, in order to crush slightly the parts in relief. Wait for the complete drying of CeboRustik (minimum 24 hours) and proceed to the application of the finish chosen.

Finish to the interior:

use CeboFlos, natural wax interior water-based beeswax, velvety to the touch and water-repellent. On CeboRustik perfectly dry apply CeboFlos in the desired color with synthetic sponge or other tool; a packaging when dry go over the surface with a soft cloth or glove to attach and remove excess of product.

Finish for interior and exterior:

use CeboTech, protective finish acrylic water. It does not change the surface structure of the materials over which it is applied and does not alter significantly the permeability of the substrate, while forming a protective layer against atmospheric agents. On CeboRustik perfectly dry apply CeboTech in the color you want, in two hands, with a synthetic sponge or glove, after dilution 1:4 with water.

For external use, use only the colors marked with an asterisk*.

Effect Craquelure to the interior:

Prepare the surface by applying CeboFix R colored in the hue that you want to get inside the cracks. Then, use CeboBreak, the bottom of the intermediate transparent acrylic, action spaccante. CeboBreak apply with a brush in one hand, up to complete saturation of the surface. After a minimum of 4 hours and within a maximum of 24 hours, apply CeboRustik with trowel steel, spreading the material evenly in the thickness desired; it is recommended not to brush on the parts that are already applied to avoid compromising the effect. Wait for the complete drying of CeboRustik and complete the decoration with CeboFlos in the colour of your choice.