CEBOIRON

New product

39 Items

Finish acrylic in the water, semicoprente, with pigments micaceous and agents for indoor and outdoor, in the colours Black and Grey is mostly used in combination with other products.

 

26,84 € tax incl.

Finish acrylic in the water, semicoprente, with pigments micaceous and agents for indoor and outdoor, in the colours Black and Grey CeboIron, is mostly used in combination with other products.

Preparation of the support:

CeboIron is applied to surfaces decorated with CeboStyle Old and pretreated with CeboIdea or CeboStone. For the realization of the effects Barkode, refer to technical data CeboIdea; for the effects of the DRAFT and FUSION refer to see technical data CeboStrong.

In the presence of shavings recent funds, peeling or absorbent to perform a perfect cleaning of the support and first apply the fixative insulating CeboFix M in one hand, a brush, diluted 1:1 with water. Then apply FondoPlus, acrylic primer water-diluted to 10%, with roller, short hair, one or two coats, until complete coverage of the bottom.

Application:

Application cycle effect BARKODE:

Apply CeboIdea with trowel plastic in a uniform thickness of 2-3 mm. Work the product before drying with the special tool CeboBars available in sizes from 4” to 8”to get the stripes, vertical or horizontal. The product is still wet, using a spatula Caress, do a slight smoothing of the scratches that were previously created. It is recommended that you proceed in drafting and / or subsequent processing to bands of approximately 1 m. Wait for the complete drying of CeboIdea (6-8 hours) and sand the surface to remove any imperfections. Then, apply CeboStyle Old in one or two hands, with the brush CeboSi 4‘, taking care to respect the direction (horizontal or vertical) of the production realized. Wait for the successful drying between one coat and the other. After 6-8 hours, but complete drying of CeboStyle Old, apply CeboIron in one hand, trowel in stainless steel: always follow the direction of the process performed, removing the excess material, so as to highlight the parts in relief.


Effect PROJECT FUSION:

dry surface pretreated CEBOSTRONG and prepared CEBOSTYLE OLD, CEBOIRON apply one coat with a stainless steel spatula, respecting the direction previously established staining and remove excess material so as to isolate the relief resulting. Combinations of different shades and a complete description of the application cycle are given in the corresponding color satin-finish.

 

Application cycle effect DRAFT:

Apply CeboStrong with trowel in stainless steel in a non-uniform manner, varying the direction of application; the product is still fresh to create incisions irregular on the surface using the appropriate tool CeboSign. Before the complete drying smooth the surface with the trowel, pressing slightly on the parts in relief, taking care to avoid the creation of areas that are too regular and defined. Wait for the complete drying of CeboStrong (10-12 hours) and sand the surface to remove any imperfections. Then, apply CeboStyle Old in two hands, with the brush CeboSi 4’. Wait for the successful drying between one coat and the other. After 6-8 hours and the complete drying of CeboStyle Old apply CeboIron in one hand, trowel in stainless steel, removing the excess material so as to highlight the parts in relief.

Application cycle FUSION effect:


Apply CeboStrong with a trowel, stainless steel, flat and evenly with a thickness of not less than 3 mm; work the product immediately tearing it with the special buffer: proceed in working in an irregular manner, avoiding the repetition of the design. Before the complete drying smooth the surface with the trowel, pressing slightly on the parts in relief, taking care to avoid the creation of areas that are too regular and defined. Wait for the complete drying of CeboStrong (10-12 hours) and sand the surface to remove any imperfections. Then, apply CeboStyle Old in two hands, with the brush CeboSi 4’. Wait for the successful drying between one coat and the other. After 6-8 hours and the complete drying of CeboStyle Old apply CeboIron in one hand, trowel in stainless steel, removing the excess material so as to highlight the parts in relief.

 

Brush Cebos available in two formats, specific to the application of the decorative Cebos, and successfully obtain the effects required special.

14,03 €

Related Products