CEBOSFERA

Coating , decorative water based interior - based resin, acrylic balls , glass , and pigments of metal. The ease of application allows you to create multiple types of processing, depending on the technique, tools, and colors used. The walls thus decorated are characterized by brightness and depth of the design, making each environment unique, precious. CeboSfera lends itself to the development of new solutions, the result of the creativity and imagination of any decorator.

Preparation of the supports:

Are suitable for all the funds to plaster, to whitewash, to civil. After cleaning and a possible filling or shaving of the support, apply with a roller CeboFix R, diluted 20% with water and colored in the same hue of the finish, in one or two hands, until you get the complete coverage of the bottom.

Application Cycle Effect The Cosmos:

Apply CeboSfera in one hand, with the trowel in stainless steel and proceed to the spatulate cross: before the complete drying, brush the surface with the trowel exhaust, to regulate the drawing and eliminate any accumulation of product. To obtain a more smooth and homogeneous, after drying of the first coat (6-8 h), it is possible to apply a second coat of CeboSfera with the same application methods previously used.

Application Cycle Effect Nebula:

Apply CeboSfera in one hand, with the trowel in steel, distributing the product evenly, and proceed as follows: using the tool CeboSign, scratch the surface with circular movements and the product is still wet, using a spatula Caress, brush gently the surface following the direction of the drawing.

Application Cycle Effect Zeffiro:

Apply CeboSfera in one hand, with the trowel in stainless steel, in horizontal or vertical direction, distributing the product evenly, and proceed as follows: using the tool CeboSign, scratch the surface in the direction chosen (horizontal or vertical) and the product is still wet, using a spatula Caress, brush gently the surface following the direction of the drawing. It is recommended that you proceed in drafting and / or subsequent processing to bands of approximately 1 meter.

Application Cycle Wave Effect:

Apply CeboSfera in one hand, with the trowel in the plastic “Wave”, in the horizontal or vertical direction, distributing the product evenly, and proceed as follows: scratch the surface, with the side that is contoured to the trowel the Wave, in the direction chosen (horizontal or vertical) and the product is still wet, using a spatula Caress, brush gently the surface following the direction of the drawing. It is recommended that you proceed in drafting and / or subsequent processing to bands of approximately 1 meter.