CEBOSI UNIVERSAL

Acrylic water based interior and exterior, washable, semicoprente. CeboSi Universal makes it easy to create fine glazes, and blending effects, from the appearance of the deeply opaque. Are suitable for all media with plaster of paris and a civilian, appropriately treated. The application of CeboSi Universal about the different types of fund proposed allows to achieve several decorative effects (smooth, sandblasted, tooled, breached).

Preparation of the supports to effect a smooth

In the presence of shavings, newer walls, funds, peeling or absorbent to perform a perfect cleaning of the support and first apply the fixative insulating CeboFix M in one hand, a brush, diluted 1:1 with water.

Preparation of media for the effects sandblasted - finish - breached

After careful cleaning of the support, apply by roller CeboFix R, fixative, acrylic pigment, in one or two hands, in order to make the surface uniform.

Application cycle - smooth effect

Apply CeboSi the Bottom, colored in tint as the finish, with roller, short hair, one or two coats, until complete coverage of the bottom. Wait for the successful drying. Apply CeboSi Universal in one hand, with the brush CeboSi, available in sizes from 2½ to 4 inches; apply the product to the brush strokes in a crisscross, avoiding baseboards assets; continue the application until you reach the part machined with the tool exhaust, so as to avoid obvious overlaps of color.

Application cycle - sandblasted

Apply CeboStone, colored tint as a finish, in one hand, with a paint brush medium (7x3 or 10x3); the working strokes of the brush crossed in order to obtain on the surface a succession of areas, rustic and smooth. Wait for the complete drying. Apply CeboSi Universal with the brush CeboSi, in the same way as described for the smooth effect.

Application cycle - and-effect finish

Apply CeboStrong with trowel in stainless steel: spread the product evenly over the surface; thus, the aesthetic effect presented by working with the trowel to spatulate, crossed, and irregular. When the product is wilting, review the surface for the purpose of crushing slightly, the parts in relief. Wait for the complete drying. Apply CeboSi Universal sponge, in two coats, diluted to 10% with water: dip the tool into the product and pass it on the surface in a circular motion to be uniform.

Application cycle - and-effect breached

Apply CeboStrong with trowel in stainless steel in a uniform thickness of 1-2 mm. The product is still wet work the surface with the special tool CeboSign to imitate the stones chipped. To get a more natural effect to proceed in the processing in an irregular manner, avoiding the repetition of the design. Before the complete drying of the product smooth the surface with the trowel, pressing slightly on the parts in relief. In case the product you present is too dry, wet the trowel with water.
Apply CeboSi Universal sponge, in two coats, diluted to 10%, in the same way as described for the palette knife effect.