WATER-BASED WATER-BASED HONEY FINISH RENNER RC3030

It is soft to the touch. Water repellency, strength and durability to the wood. Enhances the appearance of opaque natural.

Wood stained/impregnated. You can apply RCxx30 on wood treated with paint or varnish to low-solid residue. Once you clean the surface,
you can lightly sand with abrasive paper or scotch brite. Remove dust and apply 1-2 coats of the product.
Painted wood. The wood is already coated with finishing products in good condition, must be sand with grit 320. Clean the surface and proceed to paint. The wood is already coated with finishing products in a bad state, sanding it with grit 80-150 to bring the wood in the raw state. Clean the surface and proceed to paint. It is recommended that the application of 1-2 coats of Primer classic RMxx10 before the Finish wax effect RCxx30.

In the artefacts exposed to atmospheric agents is sufficient for a maintenance on the parts that begin to degrade. Lightly sand the product with the mean grain 220-320, remove dust and apply a coat of the desired color. On parts that are the most degraded, you can apply a second coat. If the artifact is a little exposed to the elements, the operations of retouching and renewal will be less frequent.

The finishes of the series waxy RCxx30